home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
UTILREEN
/
STARPRNT.LZH
/
NX-1000.DOC
< prev
next >
Wrap
Text File
|
1988-08-02
|
2KB
|
41 lines
Star NX-1000
Printer Codes
Shareware
By
Joe Nuvolini
This program was written for those who are using the Star NX-1000
printer. The program will work with the printer in either the Standard
(Epson LX-800) or IBM (IBM Proprinter) modes. DIP switch 1-6 determines which
mode the printer is in. Most commands are common to both modes and where
different, i.e., I>talics, both options are available.
Many of the commands can be combined. If you want C>ondensed,
S>uperscript then enter C and then S. The R>eset command sends a code that
sets the printer to the condition it was in when it was turned on.
After you select the codes you want, you can enter the T>ypewriter mode
and write in the font you selected. Enter a maximum of 80 standard characters
per line. There is no word wrap so press enter at the end of each line. To
exit the typewriter mode, enter / by itself on a line.
The program comes with sound turned on. If you want it modified, using a
sector editor, go to relative sector 0008, byte 280, of NX-1000.EXE and change
according to the following:
Byte 280 = 00 then no sound
Byte 280 = 01 then beep at input but no tune at end
Byte 280 = 02 then beep at input and tune at end
It would be wise to make a backup copy of NX-1000.EXE before you try this.
This program is being distributed under the Shareware program. If you
find the it useful, send a dollar or two to:
Joe Nuvolini
2982 Whileaway Cir W
Colorado Springs CO 80917
This is my first Turbo Pascal offering. Send a buck and make an old man
happy and encourage him to do some more!!!